No products in the cart.
Return To ShopWatch Database
Movado 1110
Ligne: 8.75'''
Jewels: 1/17
Power Reserve: 39 hrs
Frequency: 18000 vph
Type: Manual Wind
Period used: 1973-1974
Diameter: 19.7 mm
Height: 4.15 mm
Hands: 1.50 x 0.90 mm
The Movado 1110 watch movement, which was used during the period of 1973-1974, features a pin-lever escapement and an indirect minute hand friction clutch on the barrel. To release the stem, it requires a strong pulling motion of the crown while turning it counter-clockwise, while the inserting stem necessitates strongly depressing the crown while turning it counter-clockwise. Although there are other variants within this family, the available records are inadequate, thus only the known variants are listed. These movements are typically or always adorned with the designation of the primarily produced variant, with attached codes representing features in cases where the official designation is unknown. This movement functions exclusively as a manual wind mechanism, does not include a second hand, and operates with a pin lever system.
The Movado 1110 features the following functions:
- Manual Winding
- Pin lever
- Without Second Hand
Balance Staff Listing
| Ronda Reference # | Shock System | Buy |
|---|
Mainspring Listing
| Dimensions | GR Reference # | End Type | Buy |
|---|---|---|---|
| 1.50 x 0.090 x 8.0 mm | Manual | Buy mainspring |
Incabloc Part Listing
| Block # (Top/Bottom) | Cap Jewel # (Top/Bottom) | Spring # (Top/Bottom) |
|---|
KIF Part Listing
| Block # (Top/Bottom) | Cap Jewel # (Top/Bottom) | Spring # (Top/Bottom) |
|---|
Documents
Parts Listing
All watch database content © EmmyWatch LLC. Unauthorized redistribution of content is strictly prohibited. All rights are reserved.
